2SF Direct Drive Plunger Pump
Industrial Duty, Long Lasting, Dependable Pumps
Model: 2SF35GES
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
2SF Series pumps are hollow-shafted and designed to bolt directly to either a C-face electric motor or gas engine, depending on the model, providing an easy, compact installation.
Technical Specifications
| Max Flow | 3.5 gpm / 13.2 lpm |
| Max Pressure | 2000 |
| Inlet Port Size | 3/8" NPT(F) |
| Discharge Port Size | 3/8" NPT(M) |
| RPM | 3450 |
| Drive Type(s) | Direct |
| Material | Brass |
Product Information
-
- Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 043 - Servicing the Low and High Pressure Seals
- Tech Bulletin 055 - Removing Pump from Engine or Motor
- Tech Bulletin 065 - Higher Performance Ratings
- Tech Bulletin 073 - Hi-Temp, HPS-Plunger Pumps
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 092 - Crankcase Change
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
