Obsolete 5 Frame Plunger Pump
Industrial Duty, Long Lasting, Dependable Pumps
Model: 35
This is a OEM triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of unchromed forged brass manifolds, 304 SS valve assemblies, solid ceramic plungers and standard NBR [Bunea-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Technical Specifications
Max Flow | 5 gpm / 18.9 lpm |
Max Pressure | 1500 |
Inlet Port Size | 1/2" NPT(F) |
Discharge Port Size | 3/8" NPT(F) |
RPM | 1725 |
Drive Type(s) | Belt, Flexible Coupling and Bellhousing, Clutch |
Material | Brass |
Product Information
-
- Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
- Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
- Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
- Tech Bulletin 036 - Identifying Your Pump
- Tech Bulletin 043 - Servicing the Low and High Pressure Seals
- Tech Bulletin 047 - Blind Bearing Cover-Single Extended Shaft Pumps
- Tech Bulletin 054 - 2-Piece Seal Retainer
- Tech Bulletin 067 - Brass to Stainless Plunger Retainer
- Tech Bulletin 074 - Torque Chart
- Tech Bulletin 083 - Winterizing a Pump
- Tech Bulletin 090 - Cover, O-ring, Crankcase Change
- Tech Bulletin 105 - Seal Retainer Assemblies
- Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities